Anaerobic sealants are commonly used for powdered metal 3D printing, and overmolded electrical components. Because they cure at room temperature with no heat, they’re ideal for impregnating components with dissimilar materials that have varying coefficients of thermal expansion. These sealants are optimal for the Wet Vacuum (WV) process.

95-1000AC95-1000ACPElecflex 440Elecflex 330ElecflexFP
General PurposeCastingsPowder Metal ElectronicsFuel delivery componentsFlame resistant
Hardness, Shore D 7983527050
Density1.21 gms/cc @ 72°F (22°C)1.22 gms/cc @ 72°F (22°C)1.06 gms/cc @ 72°F (22°C)n/an/a
Coefficient of Thermal Expansion2.5 x10-4 in/in/in °C2.8 x10-4 in/in/in °C1.52x10-4 in/in/in °C2.5 x10-4 in/in/in °Cn/a
Compressive Strength9,668 psi10,275 psi3,339 psin/an/a
Compressive Modulus38,672 psi146,786 psi5,757 psin/an/a
Operating Temperature-40°F to 401°F (-40°C to 205°C)-40°F to 401°F (-40°C to 205°C) n/an/a-51°F to 401°F (-46°C to 205°C)
Fully Recoverable

Fully Recoverable

All Godfrey & Wing sealants are recoverable. Their use improves part sealing, maintains purity of the impregnation process and eliminates risk of sealant contamination.

Use of recoverable sealants allows for ease of use, longer pot life and stable properties

Cost Effective

Cost Effective

Recoverable sealants remain pure in its original formulation throughout the manufacturing process. Retaining and using pure sealant means no additives or excessive maintenance is needed. Resulting in the highest possible part quality while reducing cost and maintenance time.

Approved by OEMs Worldwide

Approved by OEMs Worldwide

Godfrey & Wing’s anaerobic sealants are approved by OEMs worldwide. The world’s leading manufacturers trust that Godfrey & Wing’s sealants are repeatable and sustainable.

Need Assistance With the Next Steps of Your Project? Let's Talk.